• 5 jaar garantie
  • 24-uurs service
  • Uit voorraad leverbaar
  • Bekijk USP's

Daarom een Bellezi.

  • 5 jaar garantie Geloven in, betekent kunnen garanderen. Standaard 5 jaar fabrieksgarantie en 10 jaar op het frame van een behandelstoel of wellnessbank.
  • 24-uurs service Wij zijn 365 dagen per jaar van 08.00 tot 22.00 telefonisch bereikbaar en kunnen wanneer nodig binnen 24 uur met een oplossing komen.
  • Uit voorraad leverbaar Wij leveren uit voorraad in vier verschillende kleuren binnen twee weken.
  • Bel ons

    Bel ons op +31 74 376 6351

    Dagelijks tussen 08:00 en 22:00 telefonisch bereikbaar

Naar homepage
Medische collectie Contact

Instructions wellness bed

See which of the problems below occurs with your treatment wellness bed. Follow the instructions. Have you followed all the steps, but is the bed still not working as you are used to? In that case, please fill in the service form at the bottom of the page. Our service team will contact you. Urgent? Please contact us by phone.

1. NOT ADJUSTABLE & BEEP TONE

The bed is not adjustable, responds with a beep when buttons are pressed and the light on the hand control is on.

  • 1a. | The light on the hand control is flashing. This means the bed is in safe/safety mode.
  • 1b. | You can reset the bed by pressing the arrows on the second row from the top simultaneously until the intermittent beep stops automatically. This takes about 6 seconds.
  • 1c. | All functions must be set to the 0 position. This means that the three functions on the top row need to go down until the lowest position is reached. Once all positions are in the 0 position, the bed should work again.
1a. | The light on the hand control is flashing. This means the bed is in safe/safety mode.
1b. | You can reset the bed by pressing the arrows on the second row from the top simultaneously until the intermittent beep stops automatically. This takes about 6 seconds.
1c. | All functions must be set to the 0 position. This means that the three functions on the top row need to go down until the lowest position is reached. Once all positions are in the 0 position, the bed should work again.

2. NOT ADJUSTABLE & NO SOUND

The bed is not adjustable and makes no sound. Follow the steps below:

  • 2a. | Check whether the power plug is properly inserted in the socket.
  • 2b. | Check that the plug of the hand control is properly inserted in the ignition.
  • 2c. | Check that the control box is working by checking that the green light is on. Is it not lighting? Follow 2d. Does it light up? Follow 2e.
  • 2d. | Under the base plate, check that the bed's power cable is properly plugged in.
  • 2e. | Is the light on but the bed not working? Open the control box and push the cable firmly. If it still doesn't work, please fill in the form below.
2a. | Check whether the power plug is properly inserted in the socket.
2b. | Check that the plug of the hand control is properly inserted in the ignition.
2c. | Check that the control box is working by checking that the green light is on. Is it not lighting? Follow 2d. Does it light up? Follow 2e.
2d. | Under the base plate, check that the bed's power cable is properly plugged in.
2e. | Is the light on but the bed not working? Open the control box and push the cable firmly. If it still doesn't work, please fill in the form below.

3. HEATING DISPLAY DOES NOT WORK

The heating display is not working. Follow the steps below:

  • 3a. | Check under the mattress whether the blue light on the adapter is working. Is it not working? Follow 3b. Does it work? Follow 3c.
  • 3b. | If the light is not on, check whether the power cable is properly inserted in the adapter. Push it in firmly. If it still doesn't work, please fill in the form below.
  • 3c. | If the light does light up, check that the black plug is properly fitted. It must be inserted in the red connector. If it still doesn't work, please fill in the form below.
3a. | Check under the mattress whether the blue light on the adapter is working. Is it not working? Follow 3b. Does it work? Follow 3c.
3b. | If the light is not on, check whether the power cable is properly inserted in the adapter. Push it in firmly. If it still doesn't work, please fill in the form below.
3c. | If the light does light up, check that the black plug is properly fitted. It must be inserted in the red connector. If it still doesn't work, please fill in the form below.

Completed all steps?

Please fill in this form if you have a problem you cannot solve.

Schedule service